PERCo TTD-08A, Assembly And Operation Manual

Page: 10 / 38

TTD-08A Electromechanical Box Tripod Turnstile
9
Figure 4 – RC panel overall view
1, 2, 3 – buttons LEFT , RIGHT , STOP for setting the passage mode;
4, 5 – green indicators «Left» , «Right» ;
6 – red indicator «Stop», 7 – RC cable
5.2.4 Control Logic Board
Turnstile control board (see Fig. 5) and remote connector block XS1 are fixed on the
bracket, located inside the post. To access the board it is necessary to remove the
turnstile cover, following the instructions of Clause 6.
Figure 5 – Control Logic Board (CLB)