Peraqua OCEAN SKIMMER HIGH 500, Instruction, Page: 14 / 20

In a properly prepared place for mounting the Skimmer, place the element
by screwing the inlet pipe to the 2" female or 2 1/2" male thread connection of the
skimmer. Also connect the PVC pipe to the drain pipe
After connecting to the inlet pipe, put the skimmer cover on top. When cutting the
liner, make sure that it is between the two EPDM gaskets and then press the flange SS316
against the front of the skimmer using the Allen screws included in the kit. Finally, press
the SS316 frame forward so that it is not possible to disconnect from the rest of the
skimmer.
14
PVC LINER OR FIBERGLASS
POOL WALL