https://www.peplink.com
11
Copyright @ 2020 Peplink
OEM Integration Instructions
：
This device is intended only for OEM integrators under the following conditions
：
The module can be used to installation in other host. the transmitter module may not be collocated with any
other transmit or antenna.
The module shall be only used with the integral antenna(s) that has been originally tested and certified with this
module.
As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirement with this
module installed (for example, digital device emission, PC peripheral requirements, etc.)
RF Exposure Warning!
This device contains transmitters and receivers which emit Radio Frequency (RF) energy. The device is
designed to comply with the limits for exposure to RF energy set by the Federal Communications Commission
(FCC) of the United States, Industry Canada (IC) of Canada, and the regulating entities of other countries.
FCC:
The final end product must be labeled in a visible area with the following: ”Contains FCC ID: U8G-
P1013”.The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.
The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.
IC:
The final end product must be labeled in a visible area with the following: ”Contains IC ID: 20682-
P1013”.The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.
The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.
