Commissioning
2
0
2
0
-0
3
17
4.3
Connection to the Network
The connection to the PROFINET IO is made via the two "RJ45 PROFINET IO" sockets on the
underside of the interface module. The front socket is labeled "X3 P1," and the rear socket is
labeled "X3 P2."
Pinout X3 P1 & X3 P2
Connecting the Device to the Controller
Plug the PROFINET connector into the RJ45 socket. Use a data cable of at least Category 5.
Note
The cable to the surrounding Ethernet devices must be at least 0.6 m long.
Terminal
Designation
1
TD+
Transmission line +
2
TD-
Transmission line -
3
RD+
Receive line +
4
n.c.
Not connected
5
n.c.
Not connected
6
RD-
Receive line -
7
n.c.
Not connected
8
n.c.
Not connected
Table 4.2
Terminals of the 8-pin "RJ45 PROFINET IO" sockets
