21
9365
2006
-0
6
16
VISUNET GMP DM
Installation and Commissioning
3.3
Commissioning VisuNet GMP RM/PC
Use a low-impandance connection between device and control cabinet.
Use cables with a minimum cross core-section of 2,5 mm
2
.
Turning on the VisuNet GMP
1. Connect the 4-pin plug with the 4-pin power supply socket at the back of the housing.
2. Bolt together the screw plug.
3. Establish the power supply.
After establishing the power supply the VisuNet GMP starts automatically. The LED on
the right hand side of the housing lights green.
Turning off the VisuNet GMP
1. Disconnect the device from the power supply.
2. After that pull out the plug.
Note!
Use the VisuNet GMP only with safety-low voltage (protective extra-low-voltage). The
power supply needs to be in line with applicable standards.
