VAA-2E2A-KE1-S/E2, VAA-2E2A-KE1P-S/E2
Commissioning
1
3
0
8
6
3
2
0
1
9
-0
4
13
Performing a Function Test
1. Activate the safety function by interrupting the input. This can be done by actuating a con-
nected mechanical switch or on the cable.
2. Check whether the safety monitor detects the interruption without issuing a fault message.
3. Stop the interruption on the input on the connected mechanical switch or on the cable.
4. Enable the input on the safety monitor.
3.6
Operating Mode
Activating operating modes for the inputs is not possible.
The parameters in the AS interface may influence the performance of the outputs. The chapter
"Operating principle" contains a more accurate description.
3.7
Operation
Programming the safety monitor parameters defines the safety function of the device. Read the
corresponding documentation.
