Sensor Programming via the Programming Button
2
0
2
0
-1
1
21
The yellow LED is now flashing. The number of flashing pulses indicates the currently pro-
grammed output type:
1x: current output
2x: voltage output
1.
Briefly press the programming button to navigate through the output types in succession.
Select the required output type.
2.
Press the programming button for two seconds to switch to the next programming step, the
programming of the sound beam width.
Programming the Sound Beam Width
The red LED is now flashing. The number of flashing pulses indicates the currently pro-
grammed sound beam width:
1x: small
2x: medium
3x: wide
1.
Briefly press the programming button to navigate through the sound beam widths in
succession. Use this method to choose the required sound beam width.
2.
Press and hold the programming button for two seconds to save all performed settings and to
return to normal operation.
