Pepperl+Fuchs SmartRunner Explorer Manual Download

Page: 6 / 68

-0

SmartRunner Explorer

Introduction

1.3

Symbols Used

This document contains symbols for the identification of warning messages and of informative
messages.

Warning Messages

You will find warning messages, whenever dangers may arise from your actions. It is mandatory
that you observe these warning messages for your personal safety and in order to avoid prop-
erty damage.

Depending on the risk level, the warning messages are displayed in descending order as fol-
lows:

Informative Symbols

Action

This symbol indicates a paragraph with instructions. You are prompted to perform an action or
a sequence of actions.

Danger!

This symbol indicates an imminent danger.

Non-observance will result in personal injury or death.

Warning!

This symbol indicates a possible fault or danger.

Non-observance may cause personal injury or serious property damage.

Caution!

This symbol indicates a possible fault.

Non-observance could interrupt the device and any connected systems and plants, or result in
their complete failure.

Note

This symbol brings important information to your attention.

Summary of Contents for SmartRunner Explorer





































































Search results

Summary of Contents for SmartRunner Explorer

Reviews:

Related manuals for SmartRunner Explorer

Brands by name

Popular brands

Pepperl+Fuchs SmartRunner Explorer, Manual

Search results

Summary of Contents for SmartRunner Explorer

Reviews:

Related manuals for SmartRunner Explorer

Brands by name

Popular brands