manualshive.com logo in svg

Pepperl+Fuchs RMS-D, Manual

Share
Download
Pepperl+Fuchs RMS-D Manual Download Page 6

34

Radar motion sensors RMS-D, RMS-D-RC, RMS-D BROAD, RMS-D-NA, RMS-D-RC-NA
Declaration of Conformity

2

Declaration of Conformity

We, Fuchs GmbH, hereby declare on our sole responsibility that

Radar motion sensors RMS-D, RMS-D-RC, RMS-D BROAD, RMS-D-NA, RMS-D-RC-NA

and all models of this product to which this declaration refers are in conformity with the following standards and 
other regulatory documents 

complies with FCC Rules Part 15 (only RMS-D-NA, RMS-D-RC-NA); R&TTE Directive 1999/5/EG; Symbol 

CE0682!; EMC Directive 2004/108/EG; DIN EN 61000-6-1:2001; DIN EN 61000-6-2:2001; DIN EN 61000-6-

3:2001; DIN EN 61000-6-4:2001; DIN EN 12978:2003; DIN EN 61496-1:2005; DIN EN 60335-1:2007; DIN EN 

60950:2000; EN 301489-3 V1.4.1; DIN EN 300440-1 V1.3.1(2001-09); DIN EN 300440-2 V1.1.1 (2001-09); IC-

NIRP Guidelines (1998-04); BGR 232:1989

Product family standard: Electromagnetic Compatibility (EMC for light industry and industry)

Fuchs GmbH in D-68301 Mannheim has a certified quality assurance system in conformity with ISO 9001.

The declaration of conformity for this product can be requested from the manufacturer.

06

8

2

ISO

9001

Summary of Contents for RMS-D

































Reviews:

No comments

Brands by name

Popular brands

Load more brands