2
02
0-
01
6
Safety
3
Safety
3.1
Symbols Used
Safety-Relevant Symbols
Informative Symbols
Action
This symbol indicates a paragraph with instructions. You are prompted to perform an action or
a sequence of actions.
3.2
Intended use
The inductive angle positioning system PMI360DV-F130... was designed for position detection
on valve actuators or valves. In addition to these main applications, the inductive angle posi
-
tioning system PMI360DV-F130... is also suitable for the precision, non-contact detection of all
movement sequences in applications where machine or system components rotate or swivel
around an axis with a maximum diameter of 41.5 mm.
3.3
General safety instructions
Responsibility for planning, assembly, commissioning, operation, maintenance, and dismount
-
ing lies with the plant operator.
Installation and commissioning of all devices may be performed only by trained and qualified
personnel.
It is dangerous for the user to carry out modifications and/or repairs and doing so will void the
warranty and exclude the manufacturer from any liability. In the event of any serious errors, stop
using the device. Secure the device against unintended operation. To have the device repaired,
return it to your local Fuchs representative or your sales center.
Danger!
This symbol indicates an imminent danger.
Non-observance will result in personal injury or death.
Warning!
This symbol indicates a possible fault or danger.
Non-observance may cause personal injury or serious property damage.
Caution!
This symbol indicates a possible fault.
Non-observance could interrupt the device and any connected systems and plants, or result in
their complete failure.
Note
This symbol brings important information to your attention.
Note
Disposal
Electronic waste is hazardous. When disposing of the equipment, observe the current statutory
requirements in the respective country of use, as well as local regulations.
