Pepperl+Fuchs OHV110-F228-R2, Manual, Page: 54 / 55

2
0
2
0
-0
9
40
OHV110-F228-R2
Troubleshooting
Hardware Reset
As an alternative to reading the control code, you can reset the handheld reader using the trig-
ger button.
1.
Disconnect the handheld reader from the PC.
2.
Press and hold the trigger button on the handheld reader.
3.
Connect the handheld reader to the PC.
4.
After a few seconds, a number of beeps will sound at an increasing rate and with a rising pitch.
Release the trigger button.
The function indicator on the handheld reader will flash green.
5.
Press and hold the trigger button on the handheld reader again.
6.
After a few seconds, five beeps will sound. Release the trigger button.
The handheld reader has now been restored to its default settings.