15
ODT-HH-MAH120-HD
Installation and Commissioning
Sighting and reading 1D and 2D codes
1.
With the trigger button pressed, aim the red square at the code to be read.
2.
Alter the distance between the handheld and the code, depending on the position of the green square:
the code is optimally sighted as soon as the two squares overlap.
The code is read automatically. In the event of successful decoding, the acoustic and tactile signal
sounds and the status LED flashes green once (depending on the configuration of the handheld).
2.4
Optimizing reading performance
With this handheld, you can improve the reading performance by specifying the size and information density
of the codes that are to be scanned.
1.
If you typically tend to read a wide variety of codes, scan the
Wide-Field DOT (Default)
code.
2.
If you typically tend to read small, 2D codes with high information density, scan the
SXGA Mode
code.
3.
If you typically tend to read medium-sized, 1D and 2D codes with low information density, scan the
VGA
Mode
code.
4.
To save your settings, scan the
Save Settings
code.
Note!
Because of the large detection area of the handheld, we advise to cover the codes you don't
want to scan. Thus you prevent to set a wrong setting inadvertently.
