M-LB-(Ex-)2000-System – Surge Protection Barriers
Installation
201
9-03
19
Connecting the Cable via the Screw Terminal
1. Plug the cable (C) into the terminal on the device (A).
2. Tighten the terminal screw with the slot-head screwdriver (B).
Observe the tightening torque of the terminal screws.
The tightening torque is 0.5 Nm to 0.6 Nm.
Figure 3.6
Screw terminal connection
Connecting the Cable via the Spring Terminal
1. Push the cable (B) into the terminal on the device (A).
2. Check that the cable (B) is fixed.
Figure 3.7
Spring terminal connection with push-in connection technology
A
Device with screw terminals
B
Slot-head screwdriver
C
Cable
5
43
2
1
A
B
C
6
5
4
3
2
1
A
Device with spring terminals with push-in connection technology
B
Cable
5
43
2
1
A
B
6
5
4
3
2
1
Note!
See corresponding datasheets for further information.
