Dat
e of
I
s
sue
04/
22/
2008
Par
t No.
194341
Optical data coupler LS611
Initial operation
16
3.
After fitting the coupling socket, use a screwdriver to close the two screw terminals.
Please observe the torque when tightening.
Illustration 6.11
Assembly of connector and cable
Do not contact the middle Pin5 (if present).
4.
Screw the socket to the respective insert (socket/connector).
Illustration 6.12
Mounting socket/connector and cable
5.
Flush mount the shield ring to the sheath end, and lay the braiding over the narrow
part of the shield ring. Now push the shield ring together with the cable and seal into
the socket until the sealing ring of the shield ring touches the socket. If wires of the
shield prevent the unit being pushed in, they have to be shortened correspondingly.
6.
Close up the plug-in connector by screwing the pressure screw to the socket.
Pin
Connection
Old standard designation
2
A, green
RxD / TxD-N
4
B, red
RxD / TxD-N
5
Connection
not
recom-
mended.
Screen/housing
Screen
2
4
2
4
green
red
