2
02
1-
07
8
Functional Safety KFD0-CS-(Ex)*.50(P), KFD0-CS-(Ex)*.51(P)
Product Description
2
Product Description
2.1
Function
KFD0-CS-*.50
This signal conditioner provides the galvanic isolation between field circuits and control
circuits.
The device can be used as a repeater or transmitter power supply for 2-wire transmitters.
The device is loop powered. From the control side no additional power supply
has to be connected.
Use the technical data to verify that proper voltage is available to the field devices.
The device is mounted on a 35 mm DIN mounting rail according to EN 60715.
KFD0-CS-Ex*.50(P)
This isolated barrier is used for intrinsic safety applications.
The device can be used as a repeater or transmitter power supply for 2-wire transmitters.
The device is loop powered. From the control side no additional power supply
has to be connected.
Use the technical data to verify that proper voltage is available to the field devices.
The device is mounted on a 35 mm DIN mounting rail according to EN 60715.
P Version
A reverse polarity protection prevents damage to the device caused by faulty wiring.
KFD0-CS-*.51(P)
This signal conditioner provides the galvanic isolation between field circuits
and control circuits.
The device transfers DC signals of fire alarms and smoke alarms from the field side
to the control side. The device can also be used to control I/P converters, valves, indicators,
and audible alarms.
The device is loop powered. From the control side no additional power supply
has to be connected.
Use the technical data to verify that proper voltage is available to the field devices.
The device is mounted on a 35 mm DIN mounting rail according to EN 60715.
P Version
A reverse polarity protection prevents damage to the device caused by faulty wiring.
KFD0-CS-Ex*.51(P)
This isolated barrier is used for intrinsic safety applications.
The device transfers DC signals of fire alarms and smoke alarms from the hazardous area
to the non-hazardous area. The device can also be used to control I/P converters, valves,
indicators, and audible alarms.
The device is loop powered. From the control side no additional power supply
has to be connected.
Use the technical data to verify that proper voltage is available to the field devices.
The device is mounted on a 35 mm DIN mounting rail according to EN 60715.
P Version
A reverse polarity protection prevents damage to the device caused by faulty wiring.
