6
/3/
19
48
ICDM-RX/MOD User Manual
Diagnostics Menu
6. Diagnostics Menu
The following pages are located under the
Diagnostics
menu:
•
Serial Communication Statistics Page on Page 48
•
Modbus RTU/ASCII over Ethernet TCP Statistics Page on Page 49
•
Serial Interface Logs Page on Page 50
•
Known Modbus Slave Device List Page on Page 50
•
Modbus/TCP and Serial Modbus Master Statistics Page on Page 52
•
Modbus/TCP Connections Page on Page 54
•
Modbus Alias Device ID Statistics Page on Page 55
•
Shared Memory Contents Page on Page 55
•
System Log Page on Page 57
6.1. Serial Communication Statistics Page
Click
Diagnostics | Communication | Serial Statistics
to access the
Serial Communication Statistics
page.
The following table provides detailed information about the
Serial Communications Statistics
page.
Serial Communication Statistics Page
TX Byte Count (To Device)
Displays the number of bytes transmitted out the serial port.
TX Message/Response Count
Displays the number of messages or responses transmitted out of the
serial port.
RX Byte Count (From Device)
Displays the number of bytes received on the serial port.
RX Message/Response Count
Displays the number of messages or responses received on the serial
port.
TX or RX Broadcast Msg Count
Displays the number of broadcast messages transmitted out the serial
port.
Master/Slaves Private Messages
Displays the number of private messages detected, those between a
master and private slave(s), on a serial port configured in Master/Slaves
mode.
Parity Error Count
Displays the number of parity errors received on the serial port. Typically
occurs due to an incorrect parity setting.
Framing Error Count
Displays the number of framing errors received on the serial port.
Typically occurs due to an incorrect baud rate or stop bit setting.
Overrun Error Count
Displays the number of overrun errors received on the serial port. This
typically occurs to one of the following events: incorrect flow control,
incorrect baud rate, incorrect data size, or incorrect stop bit setting.
