40
224
326 2
010-
05
HANDHELD I*-HH20*
Operation
EN
Setting the number of blocks
The number of blocks determines how many data blocks the Handheld reads
from the data carrier and how many data blocks can be written to the data
carrier. Each block corresponds to 4 bytes.
1.
Select
Read/Write > Data read > No. blocks
.
2.
Refer to the table to calculate how many blocks you require to enter the
relevant data.
3.
Press the CLEAR input key (
) to delete the quantity already
entered.
4.
Enter the number of blocks using the input keys.
5.
Press the left softkey (
) to conform your entry.
Transferring data to data carriers
Transfer data to a data carrier as follows:
1.
Select
Write/Read > Write data > Data
.
One or more data input fields are displayed (the number of data input
fields displayed depends on the block quantity.)
2.
Press the up navigation key (
) and the down navigation key
(
) to navigate to the individual data input fields.
3.
Enter the relevant data in the correct syntax for the data format selected
using the input keys.
