Pepperl+Fuchs Ex-DRAGON-D101, Technical Manual, Page: 33 / 105

EXDragD101_V104_TH_E.doc/ 13.05.08 page 32
6.2.5 Reading Parameters
Trigger Type
PARAMETER DEFAULT
Hardware trigger
Trigger active level
disabled
On 1 sec, off 0,6sec
Reads per cycle 1
Safety Time
High intensity
2
0,5 sec.
Beeper tone
Beeper Intensity
Read the “Enter Configuration“ code once.
1.
Read the configuration codes from the desired group.
2.
Read the “Exit and Save Configuration“ code once.
3.
Choose only one code from each selected group.
Follow the procedure given for this code group.
To change the default values:
Trigger Signal
Trigger off Timeout
Flash Mode
Aiming system
disabled
Trigger Type
software trigger
hardware trigger (*)
Trigger Signal
Trigger active level (*)
See also chapter 7.2.1
Trigger active pulse
Trigger off Timeout
Trigger off timeout
See also chapter 7.2.2
Read 2 numbers in the range 00-99:
00 = disables the trigger-off timeout
01-99 = Corresponds to a max 99 sec. Delay after the
trigger press to allow the reader to turn off
automatically.
Default = disabled