Pepperl+Fuchs Ex-DRAGON-D101, Technical Manual, Page: 31 / 105

EXDragD101_V104_TH_E.doc/ 13.05.08 page 30
Character Replacement
disabled character replacement (*)
This parameter allows up to three characters to be replaced from the barcode read. These substitutions are
stored in memory. To define each character replacement
1.) Read one of the following character replacement codes:
first character replacement
second character replacement
third character replacement
2.) From the Code Identifier Table see at page 24 or in Appendix 14, read the code identifier fort he desired
code family.
0=character replacement will be effective for all code families.
3.) Read 2 characters corresponding to the HEX value which identifies the new character to be replaced. Valid
values for all readers are in the range 00-FE
FF =The character to be replaced will be substituted with no character, that is, it will be removed from the code.