Installation
2
021-
03
17
Wall Mounting
The accessory kit includes 2 brackets.
Mounting wall-mounting brackets
Figure 3.3
1.
Before installing wall-mounting bracket, remove the factory-installed DIN mounting rail clamps:
■
To remove the DIN mounting rail clamps, loosen 3 screws each clamp.
■
To remove the adapter, loosen 2 screws each adapter.
Figure 3.4
Note
When using product version with 8 Ethernet-APL spur connections, only 1 bracket is needed.
1
Screws for DIN mounting rail clamp
2
TX20 screws for adapter
1
2
1
Screw
1
