peplink Pepwave Surf SOHO, User Manual

Page: 80 / 151

System
Multihop/TTL
This field determines the Time-to-live (TTL) of BGP packets.
Leave this field blank if the BGP neighbor is directly connected, otherwise you must specify a TTL value.
This option should be used if the configured Neighbor’s IP address does not match the selected
Interface’s network subnets. The TTL value must be between 2 to 255.
Password
(Optional) Assign a password for MD5 authentication of BGP sessions.
AS-Path
Prepending:
AS path to be prepended to the routes received from this Neighbor.
Values must be ASN and separated by commas.
For example: inputting "64530,64531" will prepend "64530, 64531" to received routes.
Hold Time
Wait time in seconds for a keepalive message from a Neighbor before considering the BGP connection
as stalled.
The value must be either 0 (infinite hold time) or between 3 and 65535 inclusively.
Default: 240
Next Hop Self Enable this option to advertise your own source address as the next hop when propagating routes.
iBGP Local
Preference
This is the metric advertised to iBGP Neighbors to indicate the preference for external routes. The value
must be between 0 to 4294967295 inclusively.
Default: 100
BFD
Enable this option to add Bidirectional Forwarding Detection for path failure. All directly connected
Neighbors that use the same physical interface share the same BFD settings. All mulithop Neighbors
share the same multihop BFD settings. You can configure BFD settings in the BGP profile listing page
after this option is enabled.
Route Advertisement Settings
Network
Advertising
Select the Networks that will be advertised to the BGP Neighbor.
Static Route
Advertising
Enable this option to advertise static LAN routes. Static routes that match the Excluded Networks table
will not be advertised.
Custom Route
Advertising
Additional routes to be advertised to the BGP Neighbor.
Advertise OSPF
When this box is checked, every learnt OSPF route will be advertised.
https://www.peplink.com 80 Copyright @ 2021 Peplink