peplink Pepwave Surf SOHO, User Manual

Page: 61 / 151

Protocol This setting specifies the IP protocol and port of traffic that matches this rule. Via a drop-down menu, the
following protocols can be specified:
● Any
● TCP
● UDP
● IP
● DSCP
Alternatively, the Protocol Selection Tool drop-down menu can be used to automatically fill in the
protocol and port number of common Internet services (e.g., HTTP, HTTPS, etc.) After selecting an item
from the
Protocol Selection Tool drop-down menu, the protocol and port number remains manually
modifiable.
Algorithm This setting specifies the behavior of the Pepwave router for the custom rule.
One of the following values can be selected:
● Enforced : Enforce traffic matching this rule through a selected WAN or VPN connection.
● Priority: Prioritise traffic matching this rule through selected WAN or VPN connection(s)
Enforced
Connection
Specify the WAN or VPN connection to be used for routing traffic regardless of the connection's health
status.
When No
Connections are
Available
This field allows you to configure the default action when all the selected Connections are not available.
● Drop the Traffic - Traffic will be discarded.
● Use Any Available Connections - Traffic will be routed to any available Connection, even it is not
selected in the list.
● Fall-through to Next Rule - Traffic will continue to match next Outbound Policy rule just like this
rule is inactive.
Terminate
Sessions on
Connection
Recovery
In the case when the highest priority connection is unavailable, matching sessions may routed through a
lower priority connection or skipped to next matching rule (Fall-through to Next Rule). By checking this
option, those sessions will be terminated upon connection recovery of any higher priority connections.
Terminated sessions will go through all the rules again to determine the outgoing connection.
When Source is a MAC address, this option will be disabled automatically.
Default: Disable
https://www.peplink.com 61 Copyright @ 2021 Peplink