peplink PEPWAVE SDX Pro Upgrade Download Page 1

Page: 1 / 4

SDX Pro Module Upgrade

Jan 2021

Important Notes

Tools required

1x Screwdriver - Phillips Head #2 / PH2

● Please take care with the connectors to not damage them.
● CAT12 FlexModules have 6x cellular antenna connections while CAT18 & CAT20 have

8x cellular antenna connections per FlexModule. So if you are upgrading from CAT12

to either CAT18 or CAT20, you will require additional antennas. The number of GPS

antennas remains the same at one.

● FlexModules are fully interchangeable between the different types of FlexModules, e.g.

ethernet, fibre, and cellular.

Summary of Contents for PEPWAVE SDX Pro

Page 1: ...s have 6x cellular antenna connections while CAT18 CAT20 have 8x cellular antenna connections per FlexModule So if you are upgrading from CAT12 to either CAT18 or CAT20 you will require additional ant...

Page 2: ...or cellular versions disconnect all antennas including the GPS antennas Step 3 There are two screws on the front of the FlexModule both need to be loosened The screws are spring loaded and will be hel...

Page 3: ...minimal force Step 5 Install the new module Make sure it is correctly aligned and press the module firmly into place The FlexModule should sit flush with surrounding FlexModules or slightly countersun...