peplink PEPWAVE SDX Pro Upgrade Download Page 2

Page: 2 / 4

Procedures

Step 1

: Power off the router. The router MUST be disconnected from power before starting the

upgrade.

Step 2

: For cellular versions, disconnect all antennas including the GPS antennas.

Step 3

: There are two screws on the front of the FlexModule; both need to be loosened. The

screws are spring loaded and will be held in place so as to not fall out. The screws remain with

the FlexModule.

https://www.peplink.com

Summary of Contents for PEPWAVE SDX Pro

Page 1: ...s have 6x cellular antenna connections while CAT18 CAT20 have 8x cellular antenna connections per FlexModule So if you are upgrading from CAT12 to either CAT18 or CAT20 you will require additional ant...

Page 2: ...or cellular versions disconnect all antennas including the GPS antennas Step 3 There are two screws on the front of the FlexModule both need to be loosened The screws are spring loaded and will be hel...

Page 3: ...minimal force Step 5 Install the new module Make sure it is correctly aligned and press the module firmly into place The FlexModule should sit flush with surrounding FlexModules or slightly countersun...

Brands by name