10.6 Event Log
The
Event Log
displays a list of all events associated with your access point. Check
Auto
Refresh
to refresh log entries automatically. Click the
Clear Log
button to clear the log.
11 Restoring Factory Defaults
The following procedure restores the settings of your access point to factory defaults:
● Power on the unit and wait for one minute.
● Press and hold the reset button for at least 20 seconds, then release.
● The unit will automatically reboot.
● Wait for one minute or until the status LED turns green, upon which the settings of the
device will have been restored to the factory defaults.
By default, the unit will acquire an IP address from a DHCP server.
C
OPYRIGHT
& T
RADEMARKS
Specifications are subject to change without notice. Copyright © 2018 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of
their respective owners.
