Controller
Management
Controller management is enabled when ticked, when untickerd the Access Point is
configured through the Web Admin GUI
Controller Type
This setting specifies via a drop-down menu one of the following valid authentication
protocols:
●
Auto - AP automatically assigned to active AP Controller
●
InControl - AP is controlled by InControl*
●
AP Controller - AP is controlled by Peplink Valance witH AP controller feature
Privately Host
InControl
Pprivately host InContro Appliancel.Check the box besidse the “Privately Host
InControl” and enter the IP Address or hostname of your InControl Appliance..
Unreachable
Action
Switch the AP “Radio off” or take no action when the AP is unreachable.
*InControl is a cloud-based service which allows you to manage all of your Peplink and
Pepwave devices with one unified system. With it, you can generate reports, gather statistics,
and configure your devices automatically.
You can sign up for an InControl account at
https://incontrol2.peplink.com
. You can register your
devices under the account, monitor their status, see their usage reports, and receive offline
notifications.
9.7
Configuration
Backing up your Pepwave Access Point settings immediately after successful completion of the
initial setup is strongly recommended. The functionality to download and upload Pepwave
Access Point settings is found at
System>Configuration
.
C
OPYRIGHT
& T
RADEMARKS
Specifications are subject to change without notice. Copyright © 2018 Pepwave Ltd. All Rights Reserved. Pepwave and the
Pepwave logo are trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of
their respective owners.
