9.6
Controller
Option to choose the controller for the Access Point. The available options are:
*InControl is a cloud-based service which allows you to manage all of your Peplink and
Pepwave devices with one unified system. With it, you can generate reports, gather statistics,
and configure your devices automatically.
You can sign up for an InControl account at
https://incontrol2.peplink.com
. You can register your
devices under the account, monitor their status, see their usage reports, and receive offline
C
OPYRIGHT
& T
RADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
●
CBC-DES
●
CFB-AES
When CBC-DES or CFB-AES is selected, an entry field will appear for the password.
Access Mode
Choose between Read Only and Read and Write.
Controller Management Settings
Controller
Management
Controller management is enabled when ticked, when untickerd the Access Point is
configured through the Web Admin GUI
Controller Type
This setting specifies via a drop-down menu one of the following valid authentication
protocols:
●
Auto - AP automatically assigned to active AP Controller
●
InControl - AP is controlled by InControl*
●
AP Controller - AP is controlled by Peplink Valance witH AP controller feature
Privately Host
InControl
Privately host InControl Appliance. Check the box beside the “Privately Host InControl”
and enter the IP Address or hostname of your InControl Appliance..
Unreachable
Action
Switch the AP “Radio off” or take no action when the AP is unreachable.
