7.2
LAN
This section offers a variety of settings that affect your access point’s operation on the LAN,
such as settings for DHCP, DMZ, and port forwarding.
*Note that the following settings will be available only when your access point is operating in
router mode.
C
OPYRIGHT
& T
RADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
IP Settings
IP Address
Enter the LAN IP address and subnet mask to assign to your access point on the LAN.
DHCP Server Settings
DHCP Server
Check to enable the DHCP server feature of your access point. Enabling DHCP is the
best option for most users. The following options will be enabled once you have checked
and enabled the DHCP server.
IP Range
Enter the first and last IP addresses of the range of addresses that your access point will
make available to DHCP clients. The default range is from
192.168.1.100
to
