28
29
DE
GB
SK
CZ
PL
HR
RO
BG
DE
GB
SK
CZ
PL
HR
RO
BG
• Keep the button held down during the drying process
in order to receive a cool air flow independently of the
temperature setting.
• When you no longer require the cool air flow, release the
button.
Styling nozzle
The styling nozzle makes it possible to target the air flow at
specific sections of hair.
• Attach the styling nozzle to the front of the hair dryer so
that it clicks into place.
• The styling nozzle can be rotated into any desired posi-
tion.
• You can remove the cooled styling nozzle from the hair
dryer.
6. Cleaning
DANGER!
Before cleaning, pull out the mains plug and allow
the device to cool down.
WARNING!
Do not use any harsh or abrasive cleaning agents.
Clean the device regularly. Be particularly sure to check that
the air inlet and air outlet are free from dust, hairs and fluff.
• Wipe down the casing, the safety mesh over the air inlet
and the styling nozzle with a slightly damp cloth.
• Remove the styling nozzle from the hair dryer. Hold the
hair dryer with the air outlet facing downwards. Clean the
safety fins with a brush.
• Slightly press the safety mesh on the
sides and then pull it off. Hold the hair
dryer with the air inlet facing down-
wards. Clean the inside and outside
safety mesh with a brush.
7. Storage
DANGER!
Do not wrap the cable around the device (Danger!
Risk of cable break!).
• You can use the hanging loop in order to store the device
in a safe and practical manner.
8. Troubleshooting
DANGER!
Risk of injury and material damage
!
• Do not attempt to repair the device yourself.
• Always remove the mains plug from the socket
whenever a fault occurs.
Fault:
Please check the following:
No func-
tion
• Is the power supply secured?
• Has the overheating protection switched off
the device? Set the on/off switch to
0
(off),
pull out the plug from the mains socket, and
allow the device to cool adequately. Before
switching it back on, ensure that there are
no hairs or foreign bodies blocking the air
inlet.
