32
• Comb the hair well.
• Place a sheet or cape around throat and neck to prevent cut-off
hair from dropping into the collar.
• Start by cutting the hair in the neck or on the sides and cut to-
wards the centre of the head. Then, cut the front section of the hair
towards the centre of the head.
• Hold the device such that the flat side of the comb attachment is
in contact with the head. Move the device evenly through the hair.
• If possible, cut against direction of hair growth.
• In order to catch all the hair, move the device several times
through each section of the hair.
• Comb the hair repeatedly and well.
Thinning hair
• Use the comb attachment with the thinning function (
2
) to reduce
the volume of the hair without changing its length.
Cutting hairlines and beard
• Use the device only with the cutting attachment and without comb
attachment to cut hair very short or to cut beard and hairline.
• Push the switch for the thinning setting to the required position.
NOTE:
please note that these cutting lengths can only
be achieved by holding the device at a right angle to
the surface of the skin.
Summary of Contents for 15133022
Page 1: ... Bedienungsanleitung Instruction manual Haarschneider Hair Trimmer ...
Page 20: ...20 ...
Page 39: ...39 ...