Use the car seat ISEOS ISOFIX
Made with Peoplbrain -
www.peoplbrain.com
recommended, under such conditions, to cover the seat of the car with a piece of material or something equivalent to prevent
the harness fixings, and in particular the metal parts, from becoming hot and burning the child.
Step : 7/71
OTHER INSTRUCTIONS:
• The child car seat is to be installed facing forwards. Never install this child car seat facing backwards.
• The manufacturer’s liability is limited to what is covered under the European Regulation （R44）. This approval does not
remove the necessity for care and respect for the Highway Code.
• This child restraint is effective only if the instructions for use are respected.
• Always fasten the child restraint even when the child is not sitting in it.
• The user must always check that any luggage and other objects likely to cause injury to the occupant of the car seat in the
case of impact are properly secured.
• Never place heavy objects on the rear parcel shelf, to avoid the danger of projectiles in the event of an accident.
• The rigid parts and the plastic sections of a child restraint device should be positioned and installed in such a way that they
cannot, under normal conditions of use of the vehicle, become trapped under a moving seat or in the vehicle door.
• Always check that no part of the seat or the harness is trapped under a seat or in the vehicle door.
• It is essential that the car seat be replaced after an accident.
• Never modify the construction or the materials of the car seat and its straps without consulting the manufacturer.
• Do not use the child restraint device without the cover.
Do not replace the seat cover with a cover other than that recommended by the manufacturer, because it will have a direct
effect on the functioning of the child restraint.
• If in any doubt about the correct installation or use of the system, the user is advised to contact the distributor or the
manufacturer of the child restraining device system.
SYMBOLS:
Consult the vehicle handbook
Consult the car seat instructions
The ISOFIX logo （see installation sticker）
Seat using an ISOFIX «Top tether» upper anchoring strap
ISEOS ISOFIX UNIVERSAL
Direction
facing forwards
Rear seat *
Classification B1**
Group 1
9 to18 kg
* The child seat must be placed on the rear seat of the vehicle or, exceptionally, in the front depending on the current
legislation in the country of use.
Your ISEOS car seat is ISOFIX UNIVERSAL approved.
Under the latest changes in regulations, it is suitable for all vehicles that have the ISOFIX UNIVERSAL system built in.
** Consult the vehicle handbook, where the manufacturer will have indicated the position of the
3 seat anchorage points in the vehicle.
WHERE SHOULD IT BE FITTED?
• Consult the vehicle handbook where you will find the positions recommended by the manufacturer for the installation of an
ISOFIX UNIVERSAL car seat, classification B1.
• Check that the position selected corresponds to the classification of your car seat （classification B1）.
• Move the front passenger seat forward so that the child does not bump into it.
5 / 38
