Use the car seat ISEOS ISOFIX
Made with Peoplbrain -
www.peoplbrain.com
Step : 54/71
6 - Select the desired height for the harness （A, B or C） and pass the protective plates for the shoulder straps through the
corresponding slits.
Step : 55/71
Thread the shoulder straps back through the two chest pads, then through the corresponding slits towards the back of the car
seat. Hook the shoulder straps back onto the catch plate
• For easier access to the top slits in the back of the car seat, put the car seat in the upright position
• For easier access to the bottom slits in the back of the car seat, put the car seat in the reclining position
29 / 38
