Operator’s manual Pentruder
®
3P8 HF-wire saw and Pentpak - Original instructions
19
f. Next tighten the upper bolt on the back brace.
g. Tighten the lower bolt on the back brace.
2. Mount the lower carriage on the track
a.
Open the three clamp nuts.
b.
Put the carriage on the track as shown in the
picture and align the feed gear with the rack on the
track.
b.
Tighten all three clamp nuts firmly first by hand and
then with a 19 mm spanner to be firmly tightened,
but not solid.
Note!
Tighten moderately to 20-25 Nm / 15-18 ft-
lbs. Do not over tighten.
