manualshive.com logo in svg

PENTORA Y35-100, Owner'S Manual, Page: 6 / 128

Share
Download
PENTORA Y35-100 Owner'S Manual Download Page 6

personal injury hazard.                             which, if not avoided, could result in minor or

                                                 moderate injury.

DANGER                                   NOTICE

A DANGER indicates a hazardous situation that,      A NOTICE indicates a situation that could

result

if not avoided, will result in death or serious           in property damage.

injury.                                                The Prohibition Safety Sign indicates an action

WARNING                                       

NOT to take in order to avoid a hazard.

A WARNING indicates a hazardous situation              

which, if not avoided, could result in death or              The Mandatory Action Sign indicates an action

serious injury.                                          that NEEDS to be taken to avoid a hazard.

                            

WARNING

Failure to follow the warnings and safety precautions contained in this manual can result in severe

injury or death. AN PENTORA ATV is not a toy and can be hazardous to operate. This vehicle handles

differently than other vehicles, such as motorcycles and cars. A collision or rollover can occur quickly,

even during routine maneuvers like turning, or driving on hills or over obstacles, if you fail to take

proper precautions.

6

Summary of Contents for Y35-100

































































































































Reviews:

No comments