PENTORA Y35-100 Owner'S Manual Download Page 23

Page: 23 / 128

Improper Tire Maintenance

Operating this ATV with improper tires or with

improper or uneven tire pressure could cause

loss of control or accident.

Always use the size and type of tires specified for

your ATV. Always maintain proper tire pressure

as described in the owner’s manual and on

safety labels.

Operating Improperly in Reverse

Improperly operating in reverse could result in a

collision with an obstacle or person. Always

follow proper operating procedures as outlined in

this manual. See page 65.

Before shifting into reverse gear, always check

for obstacles or people behind the ATV. When it’s

safe to proceed, back slowly.

Improper Vehicle Modifications

Improper installation of accessories or

modification of the ATV may cause changes in

handling, which could cause loss of control or an

accident.

Never modify the ATV through improper

installation or use of accessories.

Your

PENTORA

dealer can assist if necessary.

Summary of Contents for Y35-100

































































































































Search results

Summary of Contents for Y35-100

Reviews:

PENTORA Y35-100, Owner'S Manual, Page: 23 / 128

Search results

Summary of Contents for Y35-100

Reviews: