Pentium GA - 586ATV, User Manual

Page: 63 / 70

GA-586ATV
B-3
21-2F Enable Slots 1-15 Initialize slot 1 through 15.
30 Size Base and
Extended Memory Size base memory from 256 K to 640 K extended
memory above 1 MB.
31 Test Base and
Extended Memory Test base memory from 256 K to 640 K and extended
memory above 1 MB using various patterns.
F
This will be skipped in EISA mode and can be
"skipped" with ESC key in ISA mode.
32 Test EISA
Extended Memory If EISA Mode flag is set then test EISA memory found
in slots initialization.
F
This will be skipped in ISA mode and can be
"skipped" with ESC key in EISA mode.
33-3B Reserved
3C Setup Enabled
3D Initialize & Install
Mouse Detect if mouse is present, initialize mouse, install
interrupt vectors.
3E Setup Cache
Controller Initialize cache controller.
3F Reserved
BF Chipset
Initialization Program chipset registers with Setup values.
40 Display virus protest disable or enable.
41 Initialize Floppy
Drive & Controller Initialize floppy disk drive controller and any drives.
42 Initialize Hard Drive
& Controller Initialize hard drive controller and any drives.
43 Detect & Initialize
Serial/Parallel Ports Initialize any serial and parallel ports (also game port).
44 Reserved
45 Detect & Initialize
Math Coprocessor Initialize math coprocessor.
46 Reserved
47 Reserved
48-4D Reserved
4E Manufacturing
POST Loop or
Display Messages Reboot if Manufacturing POST Loop pin is set.
Otherwise display any messages (i.e., any non-fatal
errors that were detected during POST) and enter
Setup.
4F Security Check Ask password security (optional).
50 Write CMOS Write all CMOS values back to RAM and clear screen.
51 Pre-boot Enable Enable parity checker.
Enable NMI, Enable cache before boot.
52 Initialize Option
ROMs Initialize any option ROMs present from C8000h to
EFFFFh.
F
When FSCAN option is enabled, will initialize