Pentax WG-10, Operating Manual

Page: 122 / 298

120
3
Ta
king
Pict
ures
6
Press the 3 button.
The camera returns to capture mode.
Refer to the following “Manual Setting” for instructions on adjusting the
white balance manually.
Have a blank sheet of white paper or similar material ready.
1
In the [White Balance] screen, use the four-way
controller (
23
) to select
K
(Manual).
2
Point the camera at the blank
sheet of paper or other
material so that it fills the
frame displayed in the center
of the screen.
3
Press the shutter release button fully.
The white balance is automatically adjusted.
4
Press the 4 button.
The setting is saved and the screen returns to the [
A
Rec. Mode]
menu.
5
Press the 3 button.
The camera returns to capture mode.
If you change the [White Balance] setting frequently, you can save time
by assigning the Fn settings to the Green button (p.130).
Saving the White Balance setting
1
p.149
Manual Setting
OK OK OK OK MENU MENU Cancel Cancel OK OK MENU Cancel
White Balance
Adjust Adjust Adjust
SHUTTER SHUTTER
Adjust
SHUTTER