113
12.1 Text File read / write
Text file read/write allows you to input and output format and text data specified recording
media. Before taking this procedure, make sure of TextFile Setup (refer to “12.1.3. Text file
Setup”).
Press the [F2] [FILE] of the TRANSFER MENU
screen to view the TEXT FILE R/W screen.
12.1.1 Writing to Text File
This command allows you to transfer the existing
measurement point data in the internal memory to
specified format per file.
When output Rectangular Data, select 1 and
in case of Polar Data, select 2, then press [ENT].
Press [F5] [SELECT] to select format and data save
place, then press [ENT].
[FORMAT SELECTION]
Rectangular Data
• DC1
(Extension DC1)
• CSV
(Extension CSV)
• ExtCSV
(Extension CSV)
※
Be careful that extension of CSV and ExtCSV
will be the same.
Polar Data
• DC1
(Extension DC1)
• AUX
(Extension AUX)
[DATA SAVE PLACE]
INTERNAL
Save data in the memory of the instrument.
Output file can be loaded to PC by connecting a
USB (Refer to 12.2 Communication with USB )
SD CARD
Save data in the SD card.
Output file can be loaded to PC by connecting a USB.
[DATA SAVE PLACE
」
is set in the SD card, you can use the SD card directly without
connection USB.
Summary of Contents for R-422VN
Page 92: ...91...
