40
1
Gettin
g
Sta
rte
d
2
While pressing the battery lock lever in the direction of
the arrow
3
, insert the battery so that the PENTAX logo
is facing toward the display.
Match the marks on the battery to the marks inside the battery
compartment and push the battery in until it is locked in place. (The
battery cannot be inserted if it is incorrectly oriented.)
3
Close the battery/card cover.
After closing the battery/card cover, slide the cover lock lever in the
opposite direction indicated by
1
. When you hear a click, the cover is
securely closed.
1
Open the battery/card cover.
2
Press the battery lock lever in the direction of
3
.
The battery will be ejected. Take care not to drop the battery when
removing it.
To Remove the Battery
• This camera uses a rechargeable lithium-ion battery D-LI106. Use of
any other type of battery may damage the camera and cause a
malfunction.
• Do not remove the battery while the camera is turned on.
• When storing the battery for more than 6 months, charge the battery
for 30 minutes using the battery charger and store the battery
separately.
Be sure to recharge the battery every 6 to 12 months. Storing the
battery at or below room temperature is ideal. Avoid storing it at high
temperature.
• The date and time may be returned to the default setting if the camera
is left without the battery for a long time.
• Be careful as the camera or the battery may become hot when the
camera is used continuously for a long period of time.
