Pentax K 100D Super Operating Manual Download Page 55

Page: 55 / 220

asic Op

atio

Using a Zoom Lens

Enlarges the subject (telephoto) or captures a wider area (wide angle) with
a zoom lens. Adjust it to the desired size and take the picture.

Turn the zoom ring to the right
or left.

Turn the zoom ring clockwise for
telephoto and counterclockwise for
wide angle.

• The smaller the number of the displayed focal length, the wider the angle.

The larger the number, the more magnified the image appears.

• Power Zoom functions (Image Size Tracking, Zoom Clip, and Auto Zoom

Effect) are not compatible with this camera.

Wide Angle

Telephoto

Summary of Contents for K 100D Super





























































































































































































































Search results

Summary of Contents for K 100D Super

Reviews:

Related manuals for K 100D Super

Brands by name

Popular brands

Pentax K 100D Super, Operating Manual

Search results

Summary of Contents for K 100D Super

Reviews:

Related manuals for K 100D Super

Brands by name

Popular brands