126
4
Func
tion
Refere
nce
5
Under the light to adjust the white balance, fully display a
white sheet of paper in the viewfinder or select a white
area as the subject.
6
Press the shutter release
button fully.
Slide the focus mode lever to
\
when the shutter cannot be released.
The screen to select the measuring
range is displayed.
7
Use the rear e-dial to select the entire screen or spot area
for the measuring range.
Proceed to Step 9 if the entire screen is selected.
8
Use the four-way controller (
2345
) to move the frame
to the area you want to measure.
9
Press the
4
button.
The White Balance fine-tuning screen
appears when measuring is completed.
Tune using steps in “Fine-Tuning the
White Balance” if fine-tuning is
necessary. (p.123)
10
Press the
4
button.
The camera returns to the White Balance screen.
11
Press the
4
button twice.
The camera is ready to take a picture with the set White Balance.
• No image is recorded when the shutter release button is pressed to adjust
the white balance.
• [NG] appears when measuring is unsuccessful. Press the
4
button while
displayed to return to the White Balance fine tune screen.
• If the picture is extremely overexposed or underexposed, white balance may not be
adjusted. In this case, adjust appropriate exposure and adjust the white balance.
O K
O K
O K
OK
± 0
± 0
± 0
± 0
± 0
± 0
M a n u a l
M a n u a l
W h i t e B a l a n c e
W h i t e B a l a n c e
M a n u a l
W h i t e B a l a n c e
G
G
B
B
A
A
A
M
M
SHUTTER
O K
O K
O K
OK
C a n c e l
C a n c e l
C a n c e l
MENU