102
6
Playb
ack
/De
le
tin
g/Editin
g
Direct Printing Using PictBridge
By connecting the camera to a printer that supports PictBridge using the USB
cable (I-USB7) supplied with the camera, you can print images directly from
the camera without using a PC. Select the images you want to print and the
number of copies on the camera after it has been connected to the printer.
1
Select [PictBridge] for [USB Connection] on the
[
B
Set-up] menu.
1
“Changing the USB Connection Mode” (p.120)
2
Connect the camera to the printer
using the USB cable supplied with
the camera.
The PictBridge menu appears.
• You are recommended to use the AC adapter D-AC5 (optional) while
the camera is connected to the printer. The printer may not work
properly or the image data may be damaged if the batteries run out of
power while the camera is connected to the printer.
• The focus status lamp and flash status lamp blink slowly while data is
being transferred from the camera to the printer.
• Do not disconnect the USB cable during data transfer.
• Depending on the type of printer, not all the settings made on the
camera (such as image quality and DPOF settings) may be valid.
• Pictures may not be printed correctly when the camera is connected directly
to a PictBridge-compatible printer if the number of copies exceeds 500.
The camera will turn off automatically when you remove the USB cable.
Connecting the Camera to the Printer
Do not connect the camera to your PC while [PictBridge] is selected for
the USB connection mode.
If you connect the camera to a PC while “PictBridge” is set, refer to the
table on page 15 of PC Connection Manual.
P r i n t A l l
P r i n t O n e
P r i n t w / D P O F s e t t i n g s
O K
O K
O K
OK
e_kb376.book Page 102 Tuesday, August 10, 2004 1:46 PM
