Pentax 17311 Operating Manual Download Page 168

Page: 168 / 280

166

ayb

ack F

cti

Playback Functions Operation

Perform settings related to playing back images in the [

Playback]

menu.

You can perform the following settings in the [

Playback 1-2] menu.

Press the

button in Playback mode. The [

Playback 1] menu

appears.

For details on how to operate the menus, see “Using the Menus” (p.32).

Playback Menu Setting Items

Item

Function

Page

Slideshow

Plays back saved images one after another.

p.177

Image
Comparison

You can display two images side-by-side.

p.176

Digital Filter

Changes the color tone of captured images,
adds softening and slimming effects, or adjusts
the brightness.

p.192

Resize

Changes the recorded pixels and quality level
to create an image with a smaller file size.

p.188

Cropping

Cuts out only the desired area of the picture
and saves it as a new image.

p.190

Protect

Protects images from being accidentally
erased.

p.184

DPOF

Sets the DPOF settings.

p.200

RAW
Development

Converts RAW images to JPEG format.

p.195

Index

Joins a number of saved images together and
creates a new image from them.

p.172

Playback dsp.
methd.

Sets whether to display the Bright/Dark area
warning in Playback mode and also sets the
initial magnification when enlarging images.

p.168

Multi-img dsp.
stngs.

Sets the number of images to display in a multi-
image display screen to 4, 9 or 16.

p.170

Delete All

You can delete all saved images at once.

p.183

Summary of Contents for 17311

























































































































































































































































































Search results

Summary of Contents for 17311

Reviews:

Related manuals for 17311

Brands by name

Popular brands

Pentax 17311, Operating Manual

Search results

Summary of Contents for 17311

Reviews:

Related manuals for 17311

Brands by name

Popular brands