Pentax 17311 Operating Manual Download Page 190

Page: 190 / 280

188

cessi

ag
es

Changing the Image Size

You can reduce the size of an image by changing the number of recorded
pixels and/or quality level or cropping only part of the image.

Changes the recorded pixels and quality level to create an image with a
smaller file size.

Select [Resize] in the
[

Playback 1] menu.

Press the four-way controller (

Use the four-way controller
(

) to select an image to resize

and press the

button.

The screen to select the recorded pixels
and quality level appears.

Changing the Number of Recorded Pixels and

Quality Level (Resize)

• Only JPEG files captured with this camera can be resized.
• Larger numbers of recorded pixels and better quality levels than those of the

original image cannot be selected.

MENU

Exit

Image Comparison

Slideshow

Digital Filter
Resize
Cropping
Protect
DPOF

MENU

Resize this image

100-0046

Summary of Contents for 17311

























































































































































































































































































Search results

Summary of Contents for 17311

Reviews:

Related manuals for 17311

Brands by name

Popular brands

Pentax 17311, Operating Manual

Search results

Summary of Contents for 17311

Reviews:

Related manuals for 17311

Brands by name

Popular brands