manualshive.com logo in svg

Pentair SOLARTOUCH 521606, Installation Manual

Share
Download
Pentair SOLARTOUCH 521606 Installation Manual Download Page 12

SolarTouch Controller Firmware Update User’s Guide

 

 

SolarTouch Controller Firmware Update User’s Guide

12

 

P/N 521609 - Rev C  9/2019

1620 HAWKINS AVE., SANFORD, NC 27330 • (919) 566-8000 

10951 WEST LOS ANGELES AVE., MOORPARK, CA 93021 • (805) 553-5000 

WWW.PENTAIR.COM

All Pentair trademarks and logos are owned by Pentair. SolarTouch

® 

is a trademarks and/or 

registered trademarks of Pentair Water Pool and Spa, Inc. and/or its affiliated companies in the 

United States and/ or other countries. PICkit™ and MPLAB

®

 are trademarks and/or registered 

trademarks of Microchip Technology Inc. Microsoft

®

 and Windows

®

 are registered trademarks 

of Microsoft Corporation in the United States and other countries.  Because we are continuously 

improving our products and services, Pentair reserves the right to change specifications without 

prior notice. Pentair is an equal opportunity employer. 

© 2019 Pentair Water Pool and Spa, Inc. All rights reserved.  

This document is subject to change without notice.

Summary of Contents for SOLARTOUCH 521606













Reviews:

No comments

Brands by name

Popular brands

Load more brands