![background image](http://html.mh-extra.com/html/pentair/raychem-icestop/raychem-icestop_installation-and-operation-manual_1524280038.webp)
34
4
Attachment Methods
Raychem-IM-H58067-IceStopRoofGutterDeIcingCOM-EN 18/01
• After determining the heating cable layout, fasten
each end using standard means for that particular
type of roof. Examples of this would be attaching
with solder on a copper roof, adhesive on a mem-
brane roof, or tar on an asphalt roof.
• The heating cable is attached with a UV-resistant
cable tie to the loop formed by this material.
• Use additional clips wherever the heating cable
may be subject to abrasion from movement.
Alternate Attachment Methods
Thermal Management attachment clips were devel-
oped as an easy way to provide enough support for
the heating cable without crimping, crushing, or
otherwise damaging the heating cable and without
applying any chemicals or adhesives directly to the
heating cable. Other means may be used to attach
the heating cable as long as they:
• Do not crush, crimp, cut, or otherwise damage
the heating cable. Damage to the heating cable
could cause the system to fail, resulting in electric
shock or fire.
• Do not apply adhesives or other chemicals directly
to the heating cable. Many adhesives will not stick
to the outer jacket, which could cause the attach-
ment method to fail and could result in inadequate
drain paths.
• Provide enough strength to support the heating
cable on the roof and any load from snow that col-
lects on the system. If the attachment method is
not strong enough, the heating cable could come
loose and fall off.
One method sometimes used is to attach the heat-
ing cable with a UV-resistant cable tie to a bracket,
rod, or cable that is installed to support the heat-
ing cable. The brackets, rods, or cables are then
attached to the roof through whatever means are
appropriate for the situation and can support the
weight of the heating cable.