KREEPY KRAULY
®
PROWLER
®
910 Robotic Aboveground Pool Cleaner Installation and User’s Guide
Attention Installer:
This guide contains important information about the
installation, operation and safe use of this product. This information should
be given to the owner and/or operator of this equipment after installation
of the pool cleaner.
Attention User:
This manual contains important information that will help
you in operating and maintaining this pool cleaner. Please retain it for future
reference. Consult Pentair with any questions regarding this equipment.
Important Notice:
Before installing this product, read and follow all
warning notices and instructions which are included.
Failure to follow safety warnings and instructions can result in severe
injury, death, or property damage. Call (800) 831-7133 for additional free
copies of these instructions.
When examining the robotic pool cleaner, disconnect
the main power supply.
Keep the robotic pool cleaner out of reach of
children.
Only an original power cable must be used, at all
times. Replaced by a robotic pool cleaner certified
technician, in case of need to avoid hazard.
To reduce the risk of electrical shock, do not use
extension cord to connect unit to electrical supply;
provide a properly located outlet.
ii
Consumer Information and Safety
The pool cleaners are designed and manufactured to provide many years
of safe and reliable service when installed, operated and maintained
according to the information in this manual. Throughout the manual, safety
warnings and cautions are identified by the “ ” symbol. Be sure to read
and comply with all of the warnings and cautions.
HAZARDOUS SUCTION.
Do not play with cleaner or hose or apply to body.
Can trap and tear hair or body parts. Hose can trip or
entangle swimmers which could result in drowning.
RISK OF ELECTRICAL SHOCK OR
ELECTROCUTION.
Connect only to a grounding type receptacle protected
by a ground-fault circuit-interrupter (GFCI). Contact
a qualified electrician if you cannot verify that the
receptacle is protected by a GFCI.
Only a trained operator should operate the robotic
pool cleaner.
To avoid hand injury, operator should keep hands
away from driving belt mechanism.
Position the caddy and power supply at least 10 feet
(3 m) from the edge of the pool during operation.
Do not bury cord - locate cord to minimize abuse
from lawn mowers, hedge trimmers and other
equipment.
General Installation Information
FCC Statement
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if installed and used in
accordance with the instructions, guarantees that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
interference by one or more following measures:
Pre-Installation Check List
Before installing your cleaner, review and understand all warnings and
safety information in this guide. Failure to follow these instructions or
improper installation of the cleaner can result in damage to the pool
finish or the vinyl liner, Pentair Aquatic Systems disclaims any liability for
repairs or replacement to any of these structures or components of the
customer’s pool.
Before installing the cleaner in a vinyl liner pool:
Check liner closely for signs of deterioration or damage from age,
chemicals, pool wall damage, etc. If any damage is found, have a qualified
pool professional make all the necessary repairs. Also, if there are stones,
roots, etc., under the liner, remove them before installing the cleaner.
Before installing the cleaner in a gunite pool or a pool that is partially
or completely tiled:
Repair loose tiles and tighten any loose light rings.
Before installing the cleaner, clean your filter system:
Make sure you have cleaned the filter, including backwashing, rinsing,
and emptying all baskets. A clean system is necessary for proper cleaner
operation and coverage.
Before installing the cleaner, understand cleaner coverage:
The cleaner is designed to rid your pool of debris in approximately 4-6
hours. Less time could be needed, depending on the pool size. The
cleaner was not designed to automatically clean steps or swimouts or to
work under a solar cover. It was also not designed to do initial cleanup
for a new pool or when opening your pool for the season.
AFTER installing the cleaner, make sure the cleaner is operating
correctly:
The cleaner may need some minor adjustments to make sure it is
operating properly so there is no damage to the pool finish. Certain
vinyl liner patterns are particularly susceptible to surface wear, pattern
removal, ink rubbing off of, or serious scratches to the pattern caused by
objects coming into contact with the vinyl surface, including automatic
pool cleaners. Pentair Aquatic Systems is not responsible for any pattern
removal, abrasions or markings on vinyl liners.
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the
party responsible for compliance (Pentair) could void the user’s authority
to operate this equipment.
IMPORTANT WARNING AND SAFETY INSTRUCTIONS
Do not operate the robotic pool cleaner when there
are people swimming in the pool. Hose can trip or
entangle swimmers which could result in drowning.
This product contains a chemical known to the state
of California to cause cancer, birth defects or other
reproductive harm.
Keep the robotic pool cleaner out of reach of
persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, without proper
supervision and understanding of the instructions.
When lifting the robotic pool cleaner, take care to
prevent back injury.
