© 2016 Pentair Equipment Protection
87567377
- 6 -
INSTALLATION INSTRUCTIONS
MOUNTING INSTRUCTIONS
•
Before installing, read these instructions carefully. Failure to do so could result in damage to the unit
and/or cause a hazardous condition.
•
Check the ratings on the air conditioner to ensure the product is suitable for your application. Electrical
ratings are located on the air conditioner nameplate on the side of the unit.
•
DISCONNECT POWER BEFORE BEGINNING INSTALLATION.
•
If continuous operation of the unit is essential to ensure the function of any other equipment, then
adequate warning devices should be installed.
•
Enclosures equipped with air conditioners must be securely fastened to prevent tipping.
•
These air conditioners are not intended for use in hose-down areas or hazardous locations.
•
Once installation is complete, check all internal and external electrical clearances to ensure equipment
will function safely and properly.
CAUTION
1. Remove cover from PROLINE frame.
2. Remove shroud from air conditioner:
•
Four bolts and washers at the top of the air
conditioner.
•
Two screws in the front flange.
3. Place the air conditioner base on top of the
PROLINE frame.
4. Use four bolts and washers to fasten air
conditioner base to the top of the PROLINE
frame.
5. Place the shroud on the air conditioner
base.
6. Fasten the shroud to the air conditioner
base with four bolts and washers (or
optional lifting eyes) at the top of the shroud
and two screws in the shrouds front flange.
7. Attach the elbow and drain tube with the
clamps provided.
8. Install the filter and grille.
NOTE: The air conditioner should
be installed as level as possible to
ensure proper operation.
When lifting the installed air conditioner and
PROLINE frame via the lifting eyes, a spreader bar
must be used.
* Hardware included with
PROLINE
®
frame.
** Hardware included with
PROLINE
®
A/C
*** Optional hardware.
