background image

24

1.3 MACHINE IDENTIFICATION DATA

MACHINE ACRONYM

DESCRIPTION

VLR

VLR cast iron base (centrifugal electric pump vertical multistage with “in line” mouth).

VLRI

VLRI steel base aISI 304.

VLRX

VLRX steel base aISI 316.

4 -

nominal delivery in m

3

/h.

80 

number of stages (= nr. of impellers x 10).

/ 7

number of impellers (used when lower than the number of stages only).

(a)

Version with oval flanges.

(F)

Version with round flanges.

1.1.1 MANUAL

DATA

GeneRaL InFoRMatIon

CHaPter 1 

This manual is dedicated to the operators charged of the machine management during all the phases of its technical life.

Instruction manual 
Issue 2
Version 082014 
Code 253P9070

CONTENTS

RECIPIENTS

•  Manufacturer declaration
•  Information on safety
•  Sales information
•  Information on documents

•  Machine description
•  Transport information
•  Storage information
•  Installation information

•  Adjustment information
•  Use information
•  Maintenance information
•  Dismantling information

This manual includes the following information:

•  Chapter 1: General information
•  Chapter 2: Description
•  Chapter 3: Installation

•  Chapter 4: Use
•  Chapter 5: Maintenance
•  Chapter 6: Operating troubles

•  Chapter 7: Dismantling
•  Appendix: Product specification

These pieces of information are subdivided into the following chapters and appendixes of this manual:

1.2 INFORMATION OwNERSHIP

The information contained in this manual is owned by PENTAIR INTERNATIONAL S.a.r.l. 

The reproduction, also partial, of this manual is forbidden without the express authorisation of PENTAIR INTERNATIONAL S.a.r.l. 

The information contained in this manual only concerns the machine specified in the “Product specification” section.  

PENTAIR INTERNATIONAL S.a.r.l. reserves the right to make to the machines the changes not specified in “Machine identification 

data” whenever deemed right.

1.1 SUPPLIED DOCUMENTS

GB

Summary of Contents for Nocchi VLR 16




























Reviews: