background image

 

7

 

KREEPY KRAULY

®

 

Suction Side Pool Cleaner Installation and User’s Guide

KREEPY KRAULY

®

 

Suction Side Pool Cleaner Installation and User’s Guide

 

Eyeball Diverter Positions

Position the diverter opening to redirect the return line 
water flow so it does not interfere with the cleaner’s 
movement. Try different positions to see which works 
best in your pool:

• flow directed along the side of pool (the tile line).
• flow directed downward.
• flow directed against the hose will help steer the cleaner 

away from obstructions such as stairs and ladders.

After installing the eyeball diverter, turn the pool pump 
on. The cleaner should begin moving across the pool 
floor vacuuming up debris in its path.

Return Line Water Flow

IMPORTANT

: The water flow from your return line can 

push the Kreepy Krauly

®

 Suction Side Cleaner’s hose 

and affect its performance. It may cause the cleaner to 
steer away from the end of the pool where the return 
line is located, or it may cause your cleaner to remain in 
one section of the pool. To correct this, use the eyeball 
diverter included. If the eyeball does not fit your pool, 
use the wire diverter.
(P/N K121620) Wire diverter available for purchase from 
your Pentair Pool Products dealer.

To install the eyeball diverter:

•  First  make  sure  your  pool  pump  is  off.  Remove  the 

original eyeball from the return line at the pool by 
unscrewing the lock ring.

•  Replace  the  original  eyeball  with  the  Kreepy  Krauly  

cleaner eyeball diverter.

•  Replace  the  lock  ring  and  tighten.  Make  sure  the 

opening of the eyeball diverter points in the proper 
direction before tightening fully. 

IMPORTANT

: The eyeball diverter must fit snugly into the 

eyeball fitting. Some eyeball fittings, like Aqua Leader™ 
or Olympic™, may be too large for the eyeball diverter. 
For this situation, use the outer ring supplied with your 
cleaner to adjust for the discrepancy in size.

Eyeball Diverter

Wire Diverter (optional)

Lock (Retaining) Ring

Eyeball

Diverter

Pool Deck

Pool Wall

Return

Line

Eyeball

Fitting

Outer Ring

Eyeball Diverter

Snap into

this Groove

Summary of Contents for KREEPY KRAULY

















Reviews: